Vardaman Safetech makes aluminium truss profiles, box truss roof systems, goal posts and circle truss for stages, events and exhibitions, and aluminium structures for buildings. Every piece is made in our own workshop.
Truss profiles
From the 400 × 400 pillar to the 1100 × 650 heavy-duty beam. Every section is drawn from our engineering drawings.
Truss systems
Box truss roofs, heavy roofs with a lantern, goal posts and circle truss, built from our profiles and fittings.
600 × 525 roof beams on 400 × 400 pillars, raised on aluminium sleeve blocks with top plates and rollers.
Recent systems: 60 × 40 ft and 60 × 60 ft roofs on 30 ft pillars.
800 × 550 main beams and lantern on 500 × 500 pillars, with MS sleeve blocks, for large stages and venues.
Recent system: 60 × 60 ft roof on 30 ft pillars.
A 400 × 400 beam on two 400 × 400 pillars, for entrance gates, banners, lighting and screens.
Recent system: 20 ft span on 20 ft pillars.
A 20 ft (6096 mm) ring in 400 × 400 box truss, built from 8 rolled segments joined with spigots.
Used for centre-stage lighting rings and hanging displays.
Accessories
Spigots, bullet pins, hinges, base plates, top plates and sleeve blocks, made to fit our truss.
Internal spigot that joins two truss sections chord to chord. One per chord, four per joint.
Hinges and cornersMale and female halves with pin, for arches and pitched roofs.
Tower head with pipe rollers, for lifting the roof on 400 × 400 pillars.
Slides up the 400 × 400 pillar and carries the 600 × 525 beam. Aluminium or MS.
What we do
Vardaman Safetech designs, fabricates and installs aluminium truss systems and aluminium structures. Every member is cut, welded and finished in our own workshop, then erected on site by our own crew. We are a unit of The Amar Enterprises, which has delivered fabrication, civil and electrical works since 2012.
Truss for stages, lighting rigs, LED screens, sound and exhibition stands.
Lightweight, rust-free truss roofs for long spans, with corrosion-resistant framing built for a long service life.
Precision-cut, welded aluminium members for structural frames, equipment supports and safe access.
Aluminium systems for building fronts and interiors, made to exact drawing dimensions and tolerances.
Send us a drawing or specification and we fabricate to it. We also modify, repair and replace existing aluminium works.
Our trained erection teams install what we fabricate, so one company is responsible from workshop to handover.
Why Vardaman
Every member is cut, welded and finished in-house at H-30, Udhyog Vihar, Sukher. Nothing is outsourced.
ISO 3834-2 welding quality, ISO 15614-2 qualified procedures and ISO 9606-2 qualified welders.
Every profile and fitting has its own engineering drawing, so parts fit every time.
We are a unit of The Amar Enterprises, delivering fabrication, civil and electrical works since 2012.
Certified by UKAF CERT Limited, London. Certificates can be verified at ukafcert.org.uk.
Quality requirements for fusion welding
Qualified aluminium welding procedures
Qualified aluminium welders
Gallery
All profiles, systems and accessories with drawings and specifications, in one PDF.
Send it to us and we will come back with a solution and a quote.
